Filtration banner

Self-Cleaning Filters

Self-cleaning filters are a highly flexible, versatile and economical solution for addressing small scale water filtration problems. They are commonly used as a barrier against suspended solids to protect sensitive equipment. The self-cleaning filters eliminate the need for replacement cartridges by using a backwash system which can be controlled either fully automatically or semi-automatically depending on the model. Filtration is possible from 50 to 500 μm up to a maximum flow rate of 52 m3/hr

FAS Self_cleaning_filter

FAS semi-automatic filter

Available with 1 and 1.5” connections the FAS semi-automatic filter is rated for flow rates up to 8 m3 / h. The semi-automatic backwash filtration mode is instigated manually by the user when required.


EASY semi-automatic filter

The EASY semi-automatic filter is capable of flow rates up to 9.5m3/hr and is available with 1, 1.5, and 2” connections.


F76 WRAS Approved

The F76 self cleaning filter has WRAS approval providing you with the peace of mind that this meets regulatory requirements treating public mains water. It has a fully automatic cleaning system and filters suspended solids with a flow rate up to 16.5m3 / h. It is available with 0.5,0.75,1,1.25,1.5 and 2” connection fittings.

easy a filtration- Culligan

Easy A fully automatic filter

The Easy A filter has a fully automatic cleaning system which is controlled using a configurable timer, and is used to reduce the levels of suspended solids contained in the water up to a flow of 8 m3 / h. Available with 1, 1.5 and 2” connection fittings.

Easy Max and Easy Max A - Water Filtration - Culligan

Easy Max and Easy Max A

For higher capacity (flow rates up to 52m3/hr) applications the EASY MAX self-cleaning filters with 2” fittings (threaded) and ND 65-80-100 (flanged) fittings are available. This filter is available in automatic or semi-automatic models.