Modular design for all flow rates - Systems are available in single, parallel (twin) and in series (OFSY) formations

Automatic Control – systems are operated via an electronic control to give fully automated operations

High grade carbon steel tanks (20 to 120” diameter) with food grade epoxy coatings are used for high strength robust operations

Precise diaphragm valve systems – constructed from high strength Noryl plastic or coated cast-iron for reliable operation

Culligan’s Media Filtration Systems

Culligan’s media filters offer cost-effective and efficient filtration. Our media filters use pressure filtration to achieve optimum results. Our media is contained in a pressure vessel and inlet water is pumped through the media bed that filters out contaminants, so they can be removed. We have a range of different filter media designed to remove different contaminants from the water efficiently. This allows us to tailor a media filter to your specific applications and requirements.

Learn more about Culligan’s Media Filtration Products.

Culligan’s pressure filtration technology delivers higher filtration speeds than conventional media filters using a gravity feed.

Filtration efficiency in any media filter is dictated by loading and the characteristics of the media being used.

Culligan offers you patented multi-media filtration technology for turbidity / suspended solids removal. The filter contains a range of selected media within the one filter tailored to your application. Media is selected based on the inlet water quality and your operational loadings.

Advantages of the Culligan Multi-Media System Design:

  • Increased service life – all of the filter bed is used for filtration, unlike sand filtration where only the top layer is used. As a result pressure builds more slowly extending the operational time before a filter backwash is required.
  • Up to 60% smaller footprint than sand gravity filters – due to the higher filtration velocity rates possible with pressurised filtration, the size of equipment can be up to 60% smaller for your operational loadings than equivalent gravity sand filter models.
  • Energy Efficient – Air Mixing is not required, removing the associated energy requirements for this. The different specific gravities of each layer of our media allows it to separate into layers without the need to air mix. This also extends the life of the media.
  • Reduce or Eliminate chemical usage – Culligan’s patented media facilitates spontaneous aggregation of suspended solids, known as spontaneous flocculation. This eliminates the need for expensive chemical flocculants to remove suspended solids.

Culligan Media: Solutions for all types of problem water

Turbidity is a measure of water clarity. Turbid water can look cloudy or opaque and can also affect the colour of the water.
Material that causes well water to become turbid includes Clay, Silt, Finely dissolved organic and inorganic material & Microorganisms such as bacteria and viruses

The Culligan Solution: Filtr-cleer Media

Utilising Anthracite and silica sand based multi-layer media; Culligan is able to remove high levels of turbidity, suspended solids and even low concentrations of heavy metals.

A common characteristic of water from public systems is the chlorine taste and odour, which is often quite noticeable. This is caused by the chlorine used to disinfect the water to destroy disease-producing bacteria and other harmful organisms that may be in present in water. Another common complaint is the “rotten egg” smell, which is caused by water containing hydrogen sulphide gas (H2S).

The Culligan Solution: Cullar Media

Granulated Activated Carbon (GAC) is used in the removal of chlorine, colour and unpleasant tastes and odours, creating crystal clear and odourless water.
The use of special manufacturing techniques results in highly porous charcoals that have surface areas of 300-2,000 square metres per gram. These huge surface areas present in the activated charcoals adsorb odorous or coloured substances from the water.

Common causes for acidic water are acid rainfall due to atmospheric carbon dioxide and other airborne pollutants, as well as runoff from mining spoils, and decomposition of plant materials. Acidic water can rapid cause corrosion of pipework and fittings.

The Culligan Solution: Cullneu Media

Granular calcium carbonate is used to increase the pH of the water to neutral levels.

Arsenic contamination of groundwater is often due to naturally occurring high concentrations of arsenic in deeper levels of groundwater. A 2007 study found that over 137 million people in more than 70 countries, including the USA and Italy are probably affected by arsenic poisoning of drinking water. Chronic arsenic poisoning results from drinking contaminated well water over a long period of time. The World Health Organisation recommends a limit of 0.01 mg/l of arsenic in drinking water.

The Culligan Solution: Cullax Media

This specific media reduces arsenic levels through the adsorption of arsenic and vanadium

Although iron and manganese are not considered a health concern in terms of drinking water they do cause a number of secondary problems including; aesthetic problems resulting in orange or brown stains in pipework and fixtures, taste issues resulting in a bitter metallic taste, as well as potentially providing a food source for iron consuming bacteria.

The Culligan Solution: Cullsorb Super Iron Media

Culligan use a selective catalytic multi-layer media for the removal of iron and manganese. Oxygenation is utilised prior to the filter, and regeneration of the media is possible using specific chemicals.

Often found in surface water caused by runoff of fertilisers and other products high in nitrogen based nutrients.

The Culligan Solution: Biological Filters

Designed specifically for the removal of ammonia through acceleration nitrification by use of a biomass of aerobic bacteria supported by a layer of quartz-based media. Culligan biofilters can also oxidise and remove low concentrations of iron and manganese.

Culligan’s Media Filtration Products

High Efficiency (HE) filter

Suitable for light commercial applications, such as the pre-treatment of water for softeners and boilers, with a maximum flow rate of 8.1 m3 / h.

The High Efficiency (HE) filter with patented technology and the Culligan exclusive 1.5” HE valve provides improved efficiency by reducing contaminants that affect equipment performance and durability.

With the Culligan Smart Controller, available on the HE, customers can set-up a single or multiple tank system that adjusts to flow demand.

CTM

Ideal for flow rates between 3 and 11 m3 / h, the CTM filter utilises a 2 inch top mounted valve on a fiberglass tank.

CTM filter helps meet the challenges of your changing water quality needs at variable consumption levels, reducing solids and contaminants that affect water-using equipment performance and durability.

Using the Culligan-exclusive Smart Controller you can efficiently manage your water quality.

HiFlo6

The HiFlo6 filter is ideal for Industrial and municipal water users. With capacities between 36 and 170 m3 / h.

Longevity is assured through use of an internally epoxy-painted high grade carbon steel tank.

Available in a modular twin and quad configuration, systems can be configured and connected based on your requirements, adding tanks as your usage increases

HiFlo9

The HiFlo9 water filters are ideal for Industrial and municipal water users.

The HiFlo9 water filters can be specified with media designed to reduce suspended solids, chlorine, iron, manganese, arsenic and other contaminants in the water with flow rates ranging from 3 to 105 m3 / h.

These filters are modular in design and can be configured in parallel (twin and Quad formations) or connected in series to allow systems to be scaled up to deal with higher flow rates.

OFSY

The Culligan OFSY (Omni-Filtration System) models offer a fully automated treatment process optimized to provide filtration of feed waters, particularly surface waters with suspended solids and high turbidity levels.

The Two-stage filtration system in series, exclusive Culligan, ideal for removing large quantities (up to 100ppm) of turbidity and suspended solids.

GAC

Granular activated carbon media filters designed to adsorb organic halogen compounds, pesticides, heavy metals and other substances harmful to health.