HI-FLO 2 SERIES

This series is designed for professional and semi-industrial use and is realised with the "Triple-Hull^TM" system: the tanks are made of steel, protected by a non-toxic PVC shield, and outside by a rigid plastic layer.

Cycles are controlled by motorised valves.

Hi-Flo 2 softeners are available in tanks ranging from 330 to 435 mm in diameter.

A range of eight fully automatic softeners which provide soft water at flow rates up to 8.4 m³ per hour.

These high quality units can provide cost-effective soft water up to volumes of 200,000 litres per day.

All Soft Minder models utilise two seamless, glass fibre reinforced composite cylinders pressure tested to 150 psi.

Cycles are controlled by motorised valves and both cylinders are linked (master and slave) to a control valve on the master cylinder.

ULTRA LINE HA/HB SERIES

A softener suitable for industrial use. The tank is made of steel and it is protected internally by a food-grade layer of epoxy resins of controlled thickness and covered externally by a layer of enamel paint.

This harness is in PVC Noryl and cast iron, corrosion proof. Ultra-Line HA softeners are available in tanks ranging from 500 - 1200mm in diameter. For tanks with diameter 950 and 1200mm, it is available and also the HB version, with potentiated harness, in order to have high service flow rates.

ULTRA LINE HB SERIES

A softener suitable for industrial use. The tank if made of steel and it is protected internally by a food-grade layer of epoxy resins of controlled thickness and covered externally by a layer of enamel paint.

The cycles are controlled by diaphragm valves made of epoxy paint cast iron.

Ultra Line HB water softeners are available in tanks ranging from 1500 to 2500mm in diameter.