Culligan
Culligan Culligan Culligan Culligan Culligan Culligan Culligan
Culligan

Search for:

 
Commercial Water Treatment
Softening
Filtration
Instantaneous Cartridge Filtration
Reverse Osmosis
Dionization
Ultraviolet Disinfection
Controls and Dosing
Service and Support

 

Culligan Home » Commercial Water Treatment » Filtration

 

Our commercial/industrial filters, entirely manufactured in our Culligan plants, are made of steel and are protected by anti-corrosion coatings, a heavy layer of epoxy resin in the inside and synthetic paint on the outside. For the Hi-Flo2 series the protection is achieved with a plastic sheet in the inside of the tank and a plastic, rigid container on the outside.

Culligan filters are available in the Hi-Flo2, Hi-Flo6, and Hi-Flo9 models. The last two differ only in the depth of the filtering bed and, as a consequence, the total height. The filters of the Hi-Flo6 and Hi-Flo9 series can be combined in modules to achieve filtration systems ideally adapted to your needs. They can also be combined as double filtration in series. For more detail, download our brochure on Filtration for Commercial/Industrial Applications.

If you need an economical and flexible filtration system for small flow rate applications, you should look at our instantaneous cartridge filters.

Filtering Minerals

Culligan has a solution for all your filtering needs. Click here for a summary of our filter systems and their main applications. A complete range of filtering minerals can be selected for each type of Culligan filters, achieving the best solution for each problem.

Filtr-Cleer, a multilayer filter whose typical application is the elimination of turbidity and of samll quantities of heavy metals. The minerals utilised as filter bed media are Cullcite, a granular anthracite at low density, that makes the upper layer, and Cullsan, an ultra-pure silica sand with no carbonates, chemically inert and of unlimited life.

Cullar, for typical applications of removal of undesired odours and taste, and excess chlorine. Cullar is a granular form of activated carbon with high degree of porosity conferring on it an extraordinary adsorbing capacity.

Cullneu, for typical applications in acid water neutralisation inhibiting water aggressiveness. Cullneu is a granular mineral of calcium carbonate that dissolves in proportion to the amount of neutralized acidity and must therefore be refilled periodically.

Super Iron is a selective mineral for iron and manganese removal. It can be activated by means of many oxidant agents. It does not require the use of potassium permanganate.

Omnifiltration System And "OFSY" Filtering Groups

While "multilayer filtration" performed by a Filtr-Cleer filter captures very large quantity of turbidity with limited pressure losses, it doesn't prevent the leakage of small turbidity particles that escape from the granules before complete bed saturation is reached. To solve this problem, Culligan has perfected the "Omnifiltration" system, made of two filters of Filtr-Cleer media placed in series: the first works until the complete saturation of the mineral and the second buffers any turbidity leakage, guaranteeing the output of perfect and constant crystal-clear water, even if the quality of the inlet water changes.

Some of the most appreciated features of the OMNIFILTRATION (OFSY) system, are low installation and operating costs, reduced dimensions, high versatility, simple and quick start-up procedure, and excellent water quality. This makes the OFSY system superior to any other conventional filtration method. OFSY is in operation in hundreds of waterworks around the world.


HI-FLO2

A filter suited for reduced flow rates and characterised by "Triple-Hull" protection achieved through the use of a plastic sheet inside the tank and a rigid, plastic external container.

The sequence of phases is controlled by a single hydraulic valve. The Hi-Flo2 is available in both one inch and one and a half inch versions. Check the documentation for details.



HI-FLO6

Filter suitable for industrial applications. It differs from the Hi-Flo 9 only in its lower filtering bed thickness (and thus reduced overall height).

The Hi-Flo6 is available in multiple versions ranging from 60" to 120" diameters - please contact a member of our Commercial sales team for more information.




HI-FLO9

Industrial filter suitable for professional and industrial applications. Available models range from 20" to 120" diameters (20" to 48" models feature Noryl valves).

The tank if protected by a layer of food-grade epoxy resin on the inside and by synthetic paint on the exterior. Various models are available - please contact a member of our Commercial sales team for more information.



"TWIN" Configuration

Two Hi-Flo filters in a TWIN configuration using a single group of valves to control both filters. The units are backwashed in sequence, one after the other, thus saving on plumbing and pumping costs.




"Four-Leaf Clover" Configuration

Four filters assembled in a four-leaf clover configuration, controlled by a single, centralised group of valves resulting in a significant saving of space. The modular design makes it simple to increase capacity as necessary or to install standby equipment.



OmniFiltration System (OFSY)

The versatility and adaptability of the Omnifiltration (OFSY) system is confirmed by the hundreds of installations in waterworks around the world ranging from low to very high flow rates.

The OFSY system has a well-deserved reputation for economical and reliable performance.


 

 Copyright © 2006 Culligan International. All rights reserved.